Anderson Materials Evaluation, Inc.
HOME
ABOUT
Our Team
Mission
Our History
Quality
Positions and Internships at AME
SERVICES
Materials and Chemical Analysis
Analytical Techniques
Consulting and Expert Witness Services
SUBMITTING SAMPLES
CONTACT US
Materials
Ceramic Analysis
Composite Analysis
Glass / Fiberglass Analysis
Inorganic Chemical Analysis and Testing Services
Metal Analysis
Mineral Analysis
Organic Chemical Analysis
Paper / Packaging / Wood Analysis
Plastic / Polymer Analysis
Semiconductor / Electronic Analysis
Areas of Expertise
Adhesive Bonding
CTE, Thermal Expansion
Coatings / Paint Analysis
Cross Section Analysis
Elemental Analysis
Counterfeit Product Detection and Proof
Density and Porosity Measurements of Solid Materials
Fracture Analysis and Fractography Services
FTIR Analysis Services: Expert Solutions for Material Identification
Glass Transition Temperature
Intellectual Property Protection
Interface Analysis and Testing Services
Materials Identification / Verification
Medical Device Testing and Analysis at Anderson Materials Evaluation
Melting Temperature
Metallographic Analysis Services
Outgassing and Water Content
Particle Analysis Services
Plastic Testing
Silicone Contamination Testing of Facilities and Ovens
Surface Chemistry
Surface & Interface Cleaning and Contamination Testing
Surface Profilometry and Roughness
Thin Film Analysis Services
Analysis Capabilities
Spectroscopy
EDX / EDS
FTIR / Infrared
Gas Chromatography – Mass Spectroscopy (GC-MS)
Laser-Induced Breakdown Spectroscopy (LIBS)
Residual Gas Mass Spectroscopy Services
UV-Visible Light Absorption
XPS / ESCA
Wavelength-Dispersive X-ray Fluorescence Spectrometry (XRF/WD-XRF)
X-Ray Diffraction Analysis
Surface Analysis
Contact Angle Measurements for Surface Wettability and Surface Energy Analysis
Silicone Contamination Testing of Facilities and Ovens
Surface Profilometry and Roughness
XPS / ESCA
Mechanical Testing
Mechanical Testing (Instron)
Hardness Testing Services
Static Coefficient of Friction Measurement Services
Microscopy
Cross-section analysis
Fracture Analysis and Fractography Services
Keyence VHX-7000N Digital Optical Microscope
Metallographic
SEM / EDX
Surface Profilometry and Roughness
Thermal Analysis
DSC
TGA
TMA for CTE
Thermal Conductivity Measurement
Corrosion Analysis
Electrochemistry & Corrosion
Electrical Conductivity Testing
Test Methods
ASTM Test Methods
CA Pesticide VOC TGA
Custom and Innovative Analyses
Density and Porosity Measurements of Solid Materials
Heavy Metals Testing Services
Silicone Contamination Testing of Facilities and Ovens
RoHS Testing Services
Industries
Aerospace & Defense
Building Materials & Construction
Chemical Industry
Communications Customers
Consumer Goods Customers
Electronics
Energy & Utilities Companies
Government Agencies
Industrial Equipment
Litigation and Risk Management
Medical Industries
Resource Materials Analysis
Universities & Research Institutes
Case Histories by Material
Ceramics
Ceramic Powder Identification on Floor Tile
Cracking and Yellowing Cubic Zirconia Ceramic
Defective Ceramic Floor Tile Glaze
Lead in a Ceramic Dinner Plate – Evaluating the Safety Hazard with XRF and XPS Analysis
Roughness and Appearance Evaluation of Floor Tile Variance
Silicon Nitride Ceramic Analysis
Composites
Glass / Fiberglass
Failure of a Tempered Glass Window by Spontaneous Fracture
Glass Discoloration and Cracking
Optical Coating Degradation Problems
Reflective Coating Deposition Problem
Inorganic Chemicals
FTIR – Distinguishing the 4H & 6H Polytypes of SiC Single Crystals
Purity Analysis of a Calcium Carbonate Sample
Metals
Corrosion Deposit on Hip Implant
Graphitic Corrosion in Grey Cast Iron
Inclusions in Steel
Microbiologically Influenced Corrosion (MIC) of Indoor Sprinkler System Galvanized Steel Pipe
Stress Corrosion Cracking
Minerals / Natural Resources
Complex Oxide Elemental Analysis – Emerald
Complex Chemical Phase Analysis – Feldspar
Elemental and Chemical Phase Analysis of a Mineral
Gemstone Coating Claims Critically Examined
Organic Chemicals
Honey: A Complex Organic Chemical Mixture Analysis by GC-MS
Urine Identification by FTIR
Paper / Wood / Packaging Materials
Wood Preservative Analysis of Disintegrating Wood
Plastics / Polymers
Polyethylene Fiber XPS Surface Analysis
Polymer Analysis of Fiberglass Reinforced Nylon-6 Pellets for Injection Molding
Polymer Degradation
Polymer Heat Sealing Problem
Shear strength test of epoxy adhesive bonded 316L stainless steel
Semiconductors / Electronics
Surface Chemistry of a Silicon Oxynitride Film
Surface Contamination Investigations
Silicone Detection on Tape Using XPS Analysis
TGA Testing Services
